(801)544-4236
(801)544-4236
Application Help Application Help

335NO-120A-18

335NO-120A-18
335NO-120A-18
SKU: 335NO-120A-18
35 Amp 3 Pole, 120VAC holding coil mercury displacement relay.

Usually ships SAME DAY!

List Price: $159.80
Price: $122.00
You Save: $37.80 (24%)
Availability: Typically ships within 5 days
Product Details
35 Amp 3 Pole, 120VAC holding coil mercury displacement relay

Mercury Displacement Relays are all designed and built to meet the most exacting demands of industry. They have won their high place in the electrical field by doing the tough and tricky jobs that ordinary equipment could at best do in an uncertain manner. They have proved their ability to stand up under the most adverse conditions of temperature, dust and moisture, in all types of applications. All the care required for the manufacture of high-grade instruments is used in the manufacture of the switches. All switch parts are specially cleaned, and contamination is avoided by use of tweezers, gloves, etc., when making assemblies. 

35/60-AMP Normally Open Contactors Typical Specifications: 
  • Operate Time: 50 milliseconds 
  • Release Time: 80 milliseconds 
  • Contact Resistance: 
  • 35-AMP = .003 ohm * 
  • 60-AMP = .002 ohm* 
  • Dielectric Withstand: 2500 Vac Rms 
  • Longevity: Millions of Cycles 
  • Temperature Range: -35 degrees C to 85 degrees C 
  • Coil Terminals: #6 Binding Head Screws 
  • Load Terminals: Pressure Connectors for A.W.G. #4 - #14 on 35-AMP Units and A.W.G. #2 - #8 on 60-AMP Units 
  • UL Listing: File #E62767 for 35 and 60-AMP N.O. Units 1-4 Poles 
  • C.S.A.: File #LR41198 for 35 and 60-AMP N.O. Units (Heater Loads) 1-3 Poles
  • Auxiliary Devices for Use in Hazardous Locations. UL File #E71867 N.O. Units Approved for Class 1, Groups A, B, C and D, Division 2 Only. To Order for Hazardous Locations, Add the Suffix -X to Part Number. 
* After Cycling Under Load

MERCURY TO METAL CONTACTOR: 
The load terminals are isolated from each other by the glass in the hermetic seal. "The plunger assembly", which includes the ceramic insulator, the magnetic sleeve and related parts, floats on the mercury pool. When the coil is powered causing a magnetic field, the plunger assembly is pulled down into the mercury pool which is in turn displaced and moved up to make contact with the electrode, closing the circuit between the top and bottom load terminal, which is connected to the stainless steel can.

Proper Fusing is Required 
While MDIs contactors handle high inrush, such as lamp loads, very well, mercury contactors are susceptible to damage by short circuit currents, and should be fused to minimize short circuit fault currents. Fast acting UL class RK-1 and class J fuses and semiconductor I2t fuses more effectively protect relays than other fuses. These are low-peak fuses designed to limit short circuit currents. Regardless, when there is a short circuit, relay operations should be closely monitored afterward because of the possibility of concealed damage that could cause the relays to behave inconsistently.

Amps Amps Amps Amps
 Type of Loads  Voltage  35NO 35NO(H) 60NO 60NO(H)
 A.C. Resistive 240V 35 35 60 60
  480V 35  35 60 60
  600V 35 
48
     
 A.C. Inductive P.F .4 or greater 120V 25 30
  240V   15 20
     
 General Purpose P.F. .7 or greater 240V   60
  480V  
60
     
 D.C Resistive heating 48V    35 60
  125V   16 40
  250V   12 20
     
 Tungsten lamp 120V 35 35 60 60
     
 Single phase motor loads 120V  1HP 2HP 3HP

240V  1HP 3HP 3HP
     
Three phase motor loads 240V 5HP 7.5HP
480V 7.5HP 10HP
Product Reviews
Rated: Empty Star Empty Star Empty Star Empty Star Empty Star
Rate this product:  1   2   3   4   5 

"maintenance manager southern plants"

jeff steese on 9/4/2012 1:40:47 PM

Empty Star Empty Star Empty Star Empty Star Empty Star

What do you think about the product.: i bought these for a panel i am building. good product and good price

What do you think about the service.: great service. would recommend to anyone