120V 450W Class I Division 2 Full Coverage 30-gallon Heating Jacket (HJNA/C/D2)
Our InteliHeat® ClD2 30-gallon Heating Jacket certified for use in Class I Division 2 Classified Hazardous
Locations is ideal for gentle heating and freeze protection depending on the severity of environmental
•Ideal for gently heating, will typically maintain materials around 95°F(35°C).
•Fixed internal thermostat: 122°F(50°C).
•Polyurethane coated black nylon used on both sides of the jacket (inner and outer) to ensure
maximum wear resistance.
•High grade thermal insulation to reduce heat loss and increase efficiency while providing
protection for the operator.
•Fitted with adjustable retaining straps and quick release buckles.
•Flexible - conforms to the container wall providing optimal thermal coupling
•Delivers heat over a large surface area, minimizing the possibilities of damaging the product.
•Fit and forget, built to last - no regular maintenance required.
•Safe to use 24/7.
•16 ft. (5m) premium oil, water, and abrasion resistant SOOW power cable
•Double insulated product
•Ambient temperature: -40°F to +104°F (-40°C to +40°C)
•ETL approved to UL and CSA standards. Suitable for Class I Division 2 and Class I Zone 2 locations
•Waterproof and custom sizes available.
Hazardous Location Marking:
Class I Division 2, Groups ABCD, T3. Class I Zone 2, IIC, T3.
Class II Division 2, Groups EFG, T3. Class II Zone 22, IIIB, T3. Class III Division 1 and 2, T3
T4 rating available on request
To fit container: 30 Gallon / 100 Liter
Thermostat: Fixed 50°C / Fixed 122°F
Size: Circumference 55” – 65” / Height 14.8” (1400 – 1650mm / 375mm)