(801)544-4236
(801)544-4236
Application Help Application Help

100NO-120A

100NO-120A
100NO-120A
SKU: 100NO-120A
100 Amp 1 Pole, 120VAC holding coil mercury displacement relay.

Usually Ships in 8-10 Days

List Price: $161.15
Price: $129.15
You Save: $32.00 (20%)
Product Details
100 Amp 1 Pole, 120VAC holding coil mercury displacement relay

Mercury Displacement Relays are all designed and built to meet the most exacting demands of industry. They have won their high place in the electrical field by doing the tough and tricky jobs that ordinary equipment could at best do in an uncertain manner. They have proved their ability to stand up under the most adverse conditions of temperature, dust and moisture, in all types of applications. All the care required for the manufacture of high-grade instruments is used in the manufacture of the switches. All switch parts are specially cleaned, and contamination is avoided by use of tweezers, gloves, etc., when making assemblies.

35/60-AMP Normally Open Contactors Typical Specifications:
  • Operate Time: 50 milliseconds
  • Release Time: 80 milliseconds
  • Contact Resistance: .001 ohm*
  • Dielectric Withstand: 2500 Vac Rms
  • Longevity: Millions of Cycles
  • Temperature Range: -35 degrees C to 85 degrees C
  • Coil Terminals: #6 Binding Head Screws
  • Load Terminals: Pressure Connectors. Standard Accepts A.W.G. #2 to #12. For A.W.G. #1 to #8, Add Suffix -5 to Catalog No. (I.E. 100NO-120A-5)
  • Ratings: Derate over 240VAC Resistive
* After Cycling Under Load

MERCURY TO METAL CONTACTOR:
The load terminals are isolated from each other by the glass in the hermetic seal. "The plunger assembly", which includes the ceramic insulator, the magnetic sleeve and related parts, floats on the mercury pool. When the coil is powered causing a magnetic field, the plunger assembly is pulled down into the mercury pool which is in turn displaced and moved up to make contact with the electrode, closing the circuit between the top and bottom load terminal, which is connected to the stainless steel can.

Proper Fusing is Required
While MDIs contactors handle high inrush, such as lamp loads, very well, mercury contactors are susceptible to damage by short circuit currents, and should be fused to minimize short circuit fault currents. Fast acting UL class RK-1 and class J fuses and semiconductor I2t fuses more effectively protect relays than other fuses. These are low-peak fuses designed to limit short circuit currents. Regardless, when there is a short circuit, relay operations should be closely monitored afterward because of the possibility of concealed damage that could cause the relays to behave inconsistently.


Amps Amps
Type of Loads Voltage 100NO 100NO(H)
A.C. Resistive 240V 100 100
480V 80 80
600V 70 70
A.C. Inductive P.F .4 or greater 120V 100
240V 100
General Purpose P.F. .7 or greater 240V 100
480V 80
D.C Resistive heating 48V 100
125V 50
250V 30
Tungsten lamp 120V 100 100
Single phase motor loads 120V 7.5HP

Double phase motor loads 240V 10HP

Three phase motor loads 240V 15HP
480V 20HP
Product Reviews
Rate this product:  1   2   3   4   5