5 gallon Heavy Duty 4″ wide plastic bucket heater with 50-160F thermostat – DPCS10

Brand: Briskheat
Rated 4.33 out of 5 based on 6 customer ratings
(6 customer reviews)

$140.00 $129.95

120V 150W Heavy Duty 4″ wide 5 gal. plastic pail htr. w/ stat.

Usually ships SAME DAY!

9 in stock (can be backordered)

Add-ons Cords

A variety of high-quality Primelight® outdoor extension cord products are available and offered as bundles for discounts.Click here for more power cords options

SKU: DPCS10 Categories: ,


120V 150W Heavy Duty 4″ wide 5 gallon pail heater with 50-160F adjustable thermostat

  • Drum Size: 5 Gallon (11-1/2″ dia.)
  • Heater Size: 4″ x 35.0″
  • Amperage: 1.25 Amps
  • Drum Type: Plastic
  • Thermostat Range: 50-160F


  • Heating element is laminated between two extra thick layers of 20mil fiberglass reinforced silicone rubber
  • 360 deg. grounded multi-stranded heating element is uniformly placed to maximize heat distribution
  • Adjustable thermostat 50F to 160F (10C-218C) for plastic drums
  • 450F (232C) maximum exposure temperature on heating surface
  • Dielectric strength of over 2000 volts
  • Moisture and chemical resistant
  • Power cord 6 feet (1.8m) long
  • 120VAC: Standard 3-prong plug (NEMA 5-15)
  • The spring closure can be expanded 3″ (76mm)
  • Free ground shipping in continental US

6 reviews for 5 gallon Heavy Duty 4″ wide plastic bucket heater with 50-160F thermostat – DPCS10

  1. Rated 1 out of 5

    Lavender Blossoms

    It heats up for about a minute, then shuts off. Will not even melt coconut oil , which liquifies at 92F. Had it for a year, tried on different buckets with lanolin, shea, coconut.

    Store comments:
    These heaters are made for plastic buckets so they cannot put very much heat in that size to prevent damage to the plastic so it often takes several heaters to get the desired temperature.

    not good. She suggested I use two belts for 5gal buckets, because the one I have is not sufficient. What??

  2. Rated 5 out of 5

    Kevin Kowaleski

    I love these bucket warmers. We use them to heat up our epoxies in the winter time at the job site. They heat up quickly and keep our products usable in cold temps. They are much better than other we purchased in the past from another company. The products were shipped as stated and very quickly. I’d buy from them again.

  3. Rated 5 out of 5

    David Arnold

    We are using the heater to maintain a steady temperature for epoxy resin in the dispensing container. It works great. Gordo shipped the same day we put in the order. We are only about fifty miles from their shipping point so we received the item the next day.

  4. Rated 5 out of 5

    Jerry Kieft

    Brisk heat probably makes the most consistent product in this line. We use them when needed. They operate very well and are well made. We use the plastic pail heaters on steel pails as they limit temps to max of 160F. Good price and quick ship. We needed these to complete a project. We are an OEM company so we shop for good suppliers. Thanks

  5. Rated 5 out of 5

    Tom Brueggen

    I’m a beekeeping, and need a gentle consistent heat to keep honey flowing in the bucket. This is perfect. I can dial it right in on 95F (the natural temp of the hive) and keep it there, so no worries about over heating the honey.As it fits any plastic bucket, I have plenty of other uses when not on a honey bucket. It is well built! Service was wonderful. It’s great to have someone answer the phone and actually talk to you when you have an issue! I will certainly order from Gordo Sales again if the need arises!

  6. Rated 5 out of 5

    Gary M Kmiecik

    Works as described, Well made! EXCELLENT CUSTOMER SERVICE NUMBER 1 in my book!!!

Add a review

Your email address will not be published. Required fields are marked *