Gordo Sales, Inc. 'Heat & Control Specialists'; Outside Salt Lake City, UT, Phone: 801-544-4236

 

 
temperature controler, cartridge heater, band heater, immersion heater, tubular heater, etc.
Terms  Products  Site Map  Feedback  Search   Contact Order Status  


MIGHTY-TUFF MOUNTING


Type L Mounting Flange

Standard on all Mighty-Tuff Band Heaters. Supplied with Socket Head Cap Screw.

Type S

Mighty-Tuff Band Heaters are available with 5/8" wide straps. Some dimensional restrictions may apply based on lead type, position and width.

 

Type LS Mounting Flange

Optional Spring Loaded Screws recommended over 18" I.D. or as application requires.

 

 

Type BL

Low Profile Barrel Nut Assembly Welded to Sheath.

Type BW

1-1/4" Wide Barrel Nut Assembly Welded to Sheath.

 

Type BN

Standard Profile Barrel Nut Assembly Welded to Sheath.

Type BT

Quick Release Barrel Nut Assembly Welded to Sheath.

 

Type BR

Quick Release Assembly with Spring Loaded Screw Welded to Sheath.
Other Options
·
Full length fiberglass sleeving
· Ground Wire
· Ceramic Terminal Covers
· Standard NEMA Plugs
· Built-in Thermocouple
 
 
  Diameter Minimum
Width
Minimum Maximum
 Full Band 1" 14" 1"
 One Piece
 Expandable (Type E)
3" 14" 1"
 Two Piece Type T 3" 26" 1"
 Type SG Terminals 1-1/2" -- 2"
 Type SH Terminals 1-1/2" -- 1-1/2"
 Type F Leads 1" 14" 1"
 Type A Leads 1" -- 1"
 Type P Leads 1" -- 1"
 Type R Leads 1" -- 1"
 Type C Leads 1" -- 1"
 Terminal Box 3-1/2" -- 1-1/2"
 Type 110 3-1/2" -- 1-1/8"
 Type 115 4" -- 2"
Minimum width: 1", Maximum width: 6".
Standard gap: 1/4" - 1" depending upon I.D.

(PDF file - 10k)


Gordo Sales, Inc.  "Heat and Control Specialists" 

PO Box 1166, Layton, UT 84041 (801) 544-4236
Copyright 2002

For any questions (application, technical, availability) please call us at (801) 544-4236 between 8am and 5pm Monday - Friday mountain time