Fig.
9 Strap-made from a low expansion
alloy to tighten around the whole circumference of the heater.
Low Profile: H = 1/4", 1/2" wide (Supplied on 3"
I.D. and less). Standard Profile: H = 3/8", 5/8" wide
(supplied on 3-1/8" I.D. and larger). Also available with
hose clamp or punch lock strap.
Fig. 10
By-Pass Strap-Supplied on less than 2" wide with terminals or
Figures 5, 6 or 16.
Fig.
8 Mounting Flange-a secondary means
for mounting where a built-in method is preferred.
Fig.
11 Wedge Mount-for applications where
an extremely low profile is required or where access is limited.
Available with Figures 1, 3, 4, 5, 7 and 16 leads.
Fig.
18: Low Profile Barrel Nut Assembly
Welded to Sheath
Fig.
19: Standard Profile Barrel Nut
Assembly Welded to Sheath
Fig.
20: 1-1/4" Wide Barrel Assembly
Welded to Sheath
Fig.
21 Quick Release Assembly with Spring
Loaded Screw Assembly Welded to Sheath
Gordo Sales,
Inc. "Heat and Control Specialists"
PO Box 1166,
Layton, UT 84041 (801) 544-4236
Copyright 2002
For any questions (application, technical, availability) please call
us at (801) 544-4236 between 8am and 5pm Monday - Friday mountain time
