Rugged
construction along with high temperature and high watt density
capabilities allow the Mighty-Tuff Band Heater to surpass all other band
heaters in providing the ever increasing temperatures required for
processing today's high tech materials. The advanced design and thin
profile allow the quick transfer of heat from the element to the sheath
for efficient operation to 1400
F sheath temperature. Watt densities as high as 200
watts per square inch on small diameters and 100 watts per square inch
on larger diameters are possible. The Mighty-Tuff can stand up to shock,
vibration and many contaminants long after standard band heaters have
failed. In normal use, or in the most difficult application, the
Mighty-Tuff will improve machine productivity by improving band heater
performance.
(PDF file - 10k)
Stainless Steel Sheath
to resist oxidation Capable of operating
up to 1400 F Sheath
Temperature Highest possible
application temperatures Over 200 watts per
square inch capacity Thin profile
(3/16") for rapid response
Recommended Maximum Watt Density
for 1-1/2" Wide Mighty-Tuff Band Heaters:
· Cycled moderately. · Tightly
clamped on a smooth surface. · For
units over 2" in width, multiply watt density by 0.8. · Where
insulating blankets are used, multiply watt density by 0.7. · See
the technical section for estimating watt density.
Diameter
Minimum
Width
Minimum
Maximum
Full Band
1"
14"
1"
One
Piece
Expandable (Type E)
3"
14"
1"
Two Piece Type T
3"
26"
1"
Type SG Terminals
1-1/2"
--
2"
Type SH Terminals
1-1/2"
--
1-1/2"
Type F Leads
1"
14"
1"
Type A Leads
1"
--
1"
Type P Leads
1"
--
1"
Type R Leads
1"
--
1"
Type C Leads
1"
--
1"
Terminal Box
3-1/2"
--
1-1/2"
Type 110
3-1/2"
--
1-1/8"
Type 115
4"
--
2"
Minimum width:
1", Maximum width:
6".
Standard gap:
1/4" - 1" depending upon I.D.
Gordo Sales,
Inc. "Heat and Control Specialists"
PO Box 1166,
Layton, UT 84041 (801) 544-4236
Copyright 2002
For any questions (application, technical, availability) please call
us at (801) 544-4236 between 8am and 5pm Monday - Friday mountain time
F sheath temperature. Watt densities as high as 200
watts per square inch on small diameters and 100 watts per square inch
on larger diameters are possible. The Mighty-Tuff can stand up to shock,
vibration and many contaminants long after standard band heaters have
failed. In normal use, or in the most difficult application, the
Mighty-Tuff will improve machine productivity by improving band heater
performance.
Stainless Steel Sheath
to resist oxidation
