WRAP AROUND DRUM HEATERS

When liquids are stored in drums or pails, maintaining a viscosity or certain temperature is often necessary. Examples are adhesives, mastics, resins, grease, paint, oils and many liquid food products. Where external heating is required or preferred, flexible Silicone Rubber Drum Heaters can keep these materials at proper handling or process consistencies. A spring-hook arrangement easily attaches these items to standard 5, 15, 30 or 55 gallon steel drums. Even heat transfer limits scorching or degradation of sensitive materials. Optional molded-in thermostats are full range adjustable or have fixed settings.

 

BriskHeat Heavy Duty  Promotion 55 gal. ON SALE $160.00 (with thermostat) when you buy 2 or more   THESE ARE 4" WIDE	Powerblanket     55 gal. $325.00 (with thermostat)	Tempco Electric     55 gal starting at $148.20 (with thermostat)     THESE ARE 3" WIDE	Ogden Mfg. 55 gal. Starting at $194.00 (with thermostat) THESE ARE 3" WIDE	Acra Electric           55 gal starting at $400.50 (with thermostat)
Heating element is laminated between two layers of 20mil fiberglass reinforced silicone rubber Silicone rubber density of 21.7oz/yd² (736 grams /m²) per layer Patented grounded heating element Dielectric strength of over 2000 volts Moisture, chemical, and radiation resistant Adjustable thermostat 50° to 425°F (10° to 218°C) for metal 50° to 160°F (10° to 71°C) for plastic 450°F (232°C) maximum exposure temperature on heating surface The spring closure can be expanded 3"; (76mm) Power cord 6 feet (1.8m) long Power plug: 120VAC: NEMA 5-15 240VAC: bare wire	Complete coverage for less energy consumption Complete coverage for more even heat distribution Adjustable bungee straps Can be used on Metal and Plastic drums Comes with a thermostat (you choose between 90F, 110F, 130F or 160F) the heater for Masons (H2O) does not come with thermostat Comes with 6 ft cord and male plug to plug into any standard 3 prong outlet and with 6 ft cord and female plug used to plug in additional heaters (up to 4 heaters per 20 amp breaker) In STOCK for immediate shipment	Maximum operating temperature of 400°F (205°C). Power cord is 6-foot long, SJO Type 16/3 complete with three-prong plug for 115 VAC models. Plug not included on 230 VAC models. Heating element made of Nichrome resistance wire Surface grounded electrically with internal metal screen. 1250 volts dielectric tested. Vulcanized silicone rubber construction resistant to moisture, ozone, fungus, and radiation.	Flexible-can easily be wrapped around drum and attached with spring 3", 4" or 9-1/2" wide Full vulcanized silicone rubber, fiberglass cloth, and metal screen laminate Resistant to mechanical damage Electrically grounded 6 ft. cord with plug Optional preset or, fixed thermostat (specify setting) Other sizes and ratings available	Rapid heat-up of drum Easy installation and removal Durable metal design Infinite switch or thermostat 3-heat control 6 ft. power cord✴Variety of sizes and ratings Stock to 1 week lead time!

Why Ogden, BriskHeat or Tempco? We carry these three brands all are of excellent quality. The Ogden heater costs more and is a little more finished than Tempco. For instance the Ogden has a dial that indicates 0-10 representing the 70-425F range of the thermostat, Tempco has a knob but no dial just a line for the lowest setting, BriskHeat has a dial that indicates the actual temperature. BriskHeat is 4" wide 1200W, Ogden and Tempco are 3" wide 1000W. All brands will provide long life if maintained and cared for. BriskHeat is normally a little higher in cost but we are able to offer it at a lower price for a limited time.

Drum Capacity Cross Reference   Diameter (Inches) Diameter (Millimeter)   55 gal. 30 gal. 15 gal.  5 gal. 22-1/2" (nom.) 18-1/2" (nom.) 13-1/2" (nom.) 11-1/2" (nom.) 570 mm 470 mm 343 mm 290 mm 210 litres 115 litres  57 litres  20 litres

Are you in a Hazardous Area?
BriskHeat Hazardous-Area	Product Highlights   Class I Division 2 Groups A*, B, C, and D Class II Division 2 Groups F and G Exceptional 8" (203mm) coverage area Exceptional durability and flexibility Grounded serpentine wound heating element meets NEC 427.23 NEMA 7 temperature controller Designed for metal drums
IMMERSION DRUM HEATERS Freeze Protection and Temperature Maintenance for greater efficiency through direct heating. Built in Low Level Shut Off Safety Feature. Ideal for Plastic Drums and Sodium Hydroxide Drums. Adjustable thermostat. 120V or 240V from 400W to 4000W.
Check Watt Density Guide and Corrosion Guide for the liquid you are heating