The unheated area
from the termination end to the initial bend along with minimum
dimensional requirements are primary considerations when forming a
Mighty-Blade element. Parameters of the five possible types of bends are
shown for use when designing a Mighty-Blade.
click on any Axis Bends
to enlarge
Tolerances
and Limitations: Width: 1.0" + .015" -.010"
Thickness: .275" ±.005"
Minimum Sheath Length: 12"
Maximum Sheath Length: 180"
Maximum Voltage: 480
Maximum Amps: 40
Minimum Ohms/In. of EHL:
Mini2 coil
element, .075 ohms;
Mini3 coil
element, .05 ohms
Maximum Ohms/In. of EHL:
Mini2 coil
element, 3.5 ohms;
Mini3 coil
element, 2.33 ohms
Unheated Area Each End: 1" minimum; 12" maximum
Wattage: +5 -10%
Resistance: +10 -5%
Sheath Length: ±1/2%
Effective Heated Length: ±1%
click on any Type to
enlarge
Gordo Sales,
Inc. "Heat and Control Specialists"
PO Box 1166,
Layton, UT 84041 (801) 544-4236
Copyright 2002
For any questions (application, technical, availability) please call
us at (801) 544-4236 between 8am and 5pm Monday - Friday mountain time
